Stop Advanced-Copy - Fujitsu Eternus DX100 S3 User Manual

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management > stop advanced-copy

stop advanced-copy

This command stops an Advanced Copy session or sessions. All types of copy sessions can be stopped.
■
Syntax
stop advanced-copy -session-id
■ Parameter
-session-id
-delete-mode
■ Example(s)
The following example forcibly stops Advanced Copy session ID #1:
CLI> stop advanced-copy -session-id 1 -delete-mode forced
session_ids
This parameter specifies the session IDs that are to be stopped. One or more numbers can be
specified at the same time.
Example:
-session-id 0 (Only 0)
-session-id 0,1 (0 and 1)
-session-id 2-5 (2 to 5)
-session-id 0,2-5 (0, and 2 to 5)
session_ids
Session ID
Optional. The Copy Session Management policy is required.
This parameter specifies the deletion mode. This parameter can be specified for any type of
Advanced Copy session. When the Copy type is SnapOPC, the specified session and all prior
sessions are deleted. This parameter cannot be specified at the same time as the "-tfo-mode"
parameter. If omitted, this parameter is handled as though "normal" is specified. When
multiple sessions are specified, this parameter is applied to all the selected sessions.
forced Sessions are forcibly deleted.
normal Sessions are not forcibly deleted (default).
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
[-delete-mode {forced|normal}]
421
P2X0-1210-05ENZ0