Fujitsu Eternus DX100 S3 User Manual page 489

Chapter 5 System Settings and Display
5.1 User Management > set radius
-secondary-server
-secondary-port
-secondary-port-number
-secondary-authentication-mode
-secondary-shared-secret
Optional. This parameter specifies the secondary server. Only one server can be specified. The
server name format should be IPv4 standard notation (a base 256 "d.d.d.d" string), IPv6
address format, or a fully qualified domain name (FQDN). The types of IPv6 addresses that can
be specified are global addresses (including 6to4 addresses), link local addresses, and unique
local addresses. Up to 64 alphanumeric characters can be specified.
Example: -secondary-server 192.168.1.20
Example: -secondary-server fd80::abd0:223:ad
Example: -secondary-server foo.bar
secondary_server
Secondary server
Optional. This parameter specifies the LAN port for secondary settings. If omitted, the existing
setting is not changed.
maintenance
MNT port
remote RMT port
Optional. This parameter specifies the UDP port number of the secondary server for the
authentication protocol. Specify the port number within 1 to 5 digits. The port number cannot
be set above 65535. If omitted, the existing setting is not changed. The default value is 1812.
port_number
UDP port number of the secondary server
Optional. This parameter specifies the authentication method of the secondary server. CHAP or
PAP can be selected for the authentication method. If omitted, the existing setting is not
changed. The following methods can be specified.
chap Use CHAP. (Default)
pap Use PAP.
PAP: Password Authentication Protocol
Optional. This parameter specifies the shared secret of the secondary server. Up to 64
alphanumeric characters can be specified for the shared value. If omitted, the existing setting
is not changed.
shared_secret_code
Shared secret of the secondary server
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
489
P2X0-1210-05ENZ0