Show Advanced-Copy-Parameters - Fujitsu Eternus DX100 S3 User Manual

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management > show advanced-copy-parameters

show advanced-copy-parameters

This command displays the current settings of the Advanced Copy parameters.
■
Syntax
show advanced-copy-parameters
■ Parameter
No parameters.
■ Output
Resolution
Advanced Copy Table Size
EC/OPC Priority
Current EC/OPC Priority
SDPE
Warning
Used Advanced Copy Table Size
Usable Advanced Copy Size
Copy Schedule Mode
■ Example(s)
The following example displays the Advanced Copy parameters:
CLI> show advanced-copy-parameters
Resolution
Advanced Copy Table Size
EC/OPC Priority
Current EC/OPC Priority
SDPE
Warning
Used Advanced Copy Table
Usable Advanced Copy Size
Copy Schedule Mode
Resolution
Advanced Copy table size
EC/OPC priority and EC/OPC rate mode that is currently set in the system (Example: Auto, Very
Low Priority, Low Priority, Middle Priority, High Priority)
EC/OPC priority that is currently used
Resolution of a snap data pool volume
Threshold value of the Advanced Copy table usage
Advanced Copy table size that is currently used
Usable Advanced Copy table size
Copy Schedule Mode (Example: Session balancing, Destination RAID Group balancing)
Size
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
[x2]
[128MB]
[Auto]
[Low Priority]
[1GB]
[80%]
[30MB]
[20GB]
[Session balancing]
405
P2X0-1210-05ENZ0