Start Balancing-Flexible-Tier-Pool - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.4 Flexible Tier Management > start balancing-flexible-tier-pool

start balancing-flexible-tier-pool

This command starts evenly relocating the Flexible Tier Volumes (FTVs) among RAID groups.
Specify the FTRP that is to be balanced.
■ Syntax
start balancing-flexible-tier-pool {-ftrp-number
■ Parameter
-ftrp-number
or
-ftrp-name
■ Example(s)
The following example starts balancing FTRP01:
CLI> start balancing-flexible-tier-pool -ftrp-name FTRP01
This parameter specifies the FTRP to which the FTV to start balancing is allocated. For details,
refer to "1.2.7 Flexible Tier Pool Syntax" (page
ftrp_number
FTRP number
ftrp_name
FTRP name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
ftrp_number
| -ftrp-name
24).
216
ftrp_name
}
P2X0-1210-05ENZ0