Show Rec-Buffer - Fujitsu Eternus DX100 S3 User Manual

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management > show rec-buffer

show rec-buffer

This command is used to display the information defined for REC buffers.
■
Syntax
show rec-buffer
■ Parameter
No parameters.
■ Output
Part.
Usage
Remote Box ID
Status
Mirror Status
Size (MB)
Forwarding Interval (s)
Monitoring Time (m)
Halt Wait Timer (s)
IO Resp Mode
Immed-Halt Mode
■
Example(s)
The following example displays the REC buffer information and the REC buffer status.
CLI> show rec-buffer
Part. Type Remote Box ID
1 Receive 00DXL#########ET06F21AUABCPJ000002###### Active
2 Send 00DXL#########ET06F21AUABCPJ000002###### Inactive Recovering
3 (Unused) -
4 Receive ???
Assigned partition number
REC buffer usage
Box ID of a storage system that uses an REC buffer
REC buffer status
Mirroring status of an REC buffer
REC buffer size
Forwarding interval (unit: second)
Monitoring time (unit: minute)
HALT wait timer (unit: second)
I/O response priority mode
Immediate Halt mode
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Status Mirror Size Forwarding
Status (MB) Interval (s) Time (m)
Normal 128
128
- - -
- - 128
452
Monitoring Halt Wait
Timer (s)
4 3 10
1 1 5
- - -
1 1 5
P2X0-1210-05ENZ0