Create Odx-Buffer-Volume - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.2 Volume Management > create odx-buffer-volume

create odx-buffer-volume

This command creates the ODX Buffer volume. The ODX mode setting must be enabled. Only one ODX Buffer
volume can be registered for an ETERNUS DX (multiple ODX Buffer volumes cannot be created).
■ Syntax
create odx-buffer-volume -name
-pool-number
-type {open|standard|tpv|ftv} -size {
attention
[-attention
■
Parameter
-name
-rg-number
or
-rg-name
-pool-number
or
-pool-name
-ftrp-number
or
-ftrp-name
-type
name
{-rg-number
pool_number | -pool-name
size
{tb|gb|mb}|max} [-priority {
] [-encryption {enable|disable}]
This parameter specifies the name for the ODX Buffer volume. Only one name can be
specified. For details, refer to
name
ODX Buffer volume name
This parameter specifies the identifier of the RAID group in which the ODX Buffer volume is
to be created. For details, refer to
be set when "open" or "standard" are set for the "-type" parameter.
rg_number RAID group number
rg_name
RAID group name
This parameter specifies the identifier of the TPP in which the ODX Buffer volume is to be
created. For details, refer to
can be specified when "tpv" is set for the "-type" parameter.
pool_number
Thin Provisioning Pool number
pool_name
Thin Provisioning Pool name
This parameter specifies the identifier of the FTRP in which the ODX Buffer volume is to be
created. For details, refer to
can be specified when "ftv" is set for the "-type" parameter.
ftrp_number
FTRP number
ftrp_name
FTRP name
This parameter specifies the volume type of the ODX Buffer volume.
open Standard volume (Standard). "open" type volumes that are created are
displayed as standard volumes.
standard Normal open volumes (Standard)
tpv Thin Provisioning Volume (TPV)
ftv Flexible Tier Volume (FTV)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
rg_number
| -rg-name
pool_name | -ftrp-number ftrp_number
"1.2.10 Volume Syntax" (page
"1.2.9 RAID Group Syntax" (page
"1.2.6 Thin Provisioning Pool Syntax" (page
"1.2.8 Flexible Tier Sub Pool Syntax" (page
162
rg_name
|
| -ftrp-name ftrp_name
ftsp_number
|auto}]
26).
25). This parameter can
23). This parameter
25). This parameter
P2X0-1210-05ENZ0
}