Set Eco-Schedule - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.1 RAID Group Management > set eco-schedule

set eco-schedule

This command is used to add Eco-mode schedule events or make changes to the specified Eco-mode
schedule.
■ Syntax
set eco-schedule {-schedule-number
[-name schedule_name
[-event-type {every-day | every-week,{mon|tue|wed|thu|fri|sat|sun},{mon|tue|wed|thu|fri|sat|sun} |
specific-day,
{mon|tue|wed|thu|fri|sat|sun}}] [-event-from
■ Parameter
-schedule-number
or
-schedule-name
-name
-event-number
-event-type Optional. This parameter specifies the Eco-mode schedule event type. If omitted, the existing
schedule_number
] [-event-number {1|2|3|4|5|6|7|8}]
MMDD R MM
, | specific-week,
This parameter specifies an Eco-mode schedule identifier. Only one Eco-mode schedule
identifier can be specified. For details, refer to
schedule_number
Schedule number
schedule_name
Schedule name
Optional. This parameter specifies a new Eco-mode schedule name. If omitted, the existing
setting is not changed. For details, refer to
schedule_name
Schedule name
Optional. This parameter specifies the Eco-mode schedule event number to change or to add
the Eco-mode schedule event to the Eco-mode schedule. The Eco-mode schedule event
number is a value from 1 to 8. Only one number can be specified. The Eco-mode schedule
event number can be displayed by using the "show eco-schedule" command. If omitted, the
Eco-mode schedule event specified by this parameter value is not changed.
1 – 8 Schedule event number
setting is not changed.
every-day The Eco-mode schedule is applied to every day. A suboperand is not required.
Example: -event-type every-day
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
| -schedule-name
,{1st|2nd|3rd|4th|last},{mon|tue|wed|thu|fri|sat|sun},
hhmm hhmm
] [-event-to
"1.2.14 Eco-mode Schedule Syntax" (page
"1.2.5 Alias Name Syntax" (page
96
schedule_name
}
]
23).
P2X0-1210-05ENZ0
29).