Chapter 5 System Settings and Display
5.1 User Management > initialize all-users
initialize all-users
This command clears all of the existing user accounts. Note that only the initial default user is enabled.
■
Syntax
initialize all-users -execution {yes|no}
■
Parameter
-execution
■
Example(s)
The following example initializes all of the registered user accounts:
CLI> initialize all-users
This parameter specifies the execution mode. User accounts are initialized only when selecting
"yes".
yes
All the user accounts are initialized.
no
No operation.
-execution yes
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
480
P2X0-1210-05ENZ0