Fujitsu Eternus DX100 S3 User Manual page 72

Chapter 3 Configuration Settings and Display
3.1 RAID Group Management > show raid-groups
The following example displays the details of RAID Group #0 when the RAID level is RAID6-FR:
CLI> show raid-groups -rg-number 0
RAID Group
No. Name
--- ---------------- -------- -------------- --------- ------------------------------- ------------ ------------ --------- ------- -------------
0 R1
<Disk List>
Disk
-------------- ----------------------------- ------------------- --------------
DE#01-Disk#0
DE#01-Disk#1
DE#01-Disk#2
DE#01-Disk#3
DE#01-Disk#4
DE#01-Disk#5
DE#01-Disk#6
DE#01-Disk#7
DE#01-Disk#8
DE#01-Disk#9
DE#01-Disk#10
RAID Consist of Assigned Status
Level Fast Recovery CM
RAID6-FR (3D+2P)x2+1HS CM#0 Broken
Status Usage
Available Data
Available Data
Available Data
Available Data
Available Data
Broken Data
Available Data
Available Data
Available Data
Available Data
Available Data
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Total
Capacity(MB) Capacity(MB) Depth(KB) Group
1116160
Mirroring
72
Free Stripe Key Fast Recovery
Disk
1116136 64 Enable DE#01-Disk#5
P2X0-1210-05ENZ0