Start Balancing-Thin-Pro-Volume - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.2 Volume Management > start balancing-thin-pro-volume

start balancing-thin-pro-volume

This command starts evenly relocating the Thin Provisioning Volumes (TPVs) among RAID groups.
■
Syntax
start balancing-thin-pro-volume {-volume-number
■ Parameter
-volume-number
or
-volume-name
■ Example(s)
The following example starts balancing TPV01:
CLI> start balancing-thin-po-bolume -volume-name TPV01
This parameter specifies the TPV to start balancing. Only one parameter can be specified. For
details, refer to "1.2.10 Volume Syntax" (page
volume_number
Volume number
volume_name
Volume name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
volume_number
| -volume-name
26).
140
volume_name
}
P2X0-1210-05ENZ0