Fujitsu Eternus DX100 S3 User Manual page 220

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > stop balancing-flexible-tier-pool
The following is an example when Host Affinity Mode is disabled:
CLI> set fc-parameters -port 000,001 -host-affinity disable
CLI> create raid-group -name r1 -level 1 -disks 006,007
CLI> create volume -name v -count 3 -rg-name r1 -type open -size 256mb
CLI> set mapping -volume-name v0,v1,v2 -lun 0-2 -port 000,001
Procedure
1
Disable the Host Affinity Mode (FC).
2
Create a RAID group named "r1".
3
Create volumes named "v0", "v1" and "v2" in the RAID group named "r1".
4
Use mapping to set the relationship between host interface ports 000 and 001, volumes v0,
v1, and v2, and LUNs 0, 1, and 2.
For details on setting host affinity with host groups, port groups, and LUN groups, refer to
Setting Procedure" (page 924).
220
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
End of procedure
"D.1.2 Host Access
P2X0-1210-05ENZ0