Shutdown - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.3 System Settings > shutdown

shutdown

This command will power off or power cycle (power off and on) the system. The CLI session is automatically
closed.
• The ETERNUS DX is shutdown and then restarted regardless of the power synchronization setting.
• When power synchronization is enabled and the ETERNUS DX is shut down by this command, the
ETERNUS DX may automatically restart according to the power control process of the server.
■ Syntax
shutdown -mode {off | reboot}
■ Parameter
-mode
■ Example(s)
The following example powers off the system:
CLI> shutdown -mode off
The following example powers the system off and on:
CLI> shutdown -mode reboot
This parameter specifies the shutdown mode.
off Power off the system.
reboot Power OFF and power ON the system.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
653
P2X0-1210-05ENZ0