Set Dedicated-Spare - Fujitsu Eternus DX100 S3 User Manual

Fujitsu eternus cli user's guide
Hide thumbs Also See for Eternus DX100 S3:
Table of Contents

Advertisement

Chapter 3 Configuration Settings and Display
3.1 RAID Group Management > set dedicated-spare

set dedicated-spare

This command assigns a disk as a Dedicated Hot Spare. A Dedicated Hot Spare is used as a substitute for a disk
that has failed in a specific RAID group. If there are no dedicated hot spares assigned (or available) to a RAID
group, a global hot spare is used. A dedicated hot spare can only be assigned to a single RAID group.
However, one RAID group can have one or more dedicated hot spares.
Syntax
set dedicated-spare -disks
Parameter
-disks
-rg-number
or
-rg-name
Example(s)
The example assigns disk #110 as a dedicated hot spare to the RAID group "R1":
CLI> set dedicated-spare -disks 110 -rg-name R1
The following example assigns disks #110 and #111 as dedicated hot spares to the RAID group named
"RGP001":
CLI> set dedicated-spare -disks 110,111 -rg-name RGP001
The following example assigns two different disks to two different RAID groups. Disk #110 is assigned as a
Dedicated Hot Spare to the RAID group named "RGP1". Disk #111 is assigned as a Dedicated Hot Spare to the
RAID group named "RGP2":
CLI> set dedicated-spare -disks 110,111 -rg-name RGP1,RGP2
disks
{-rg-number
This parameter specifies the disks to be registered as Dedicated Hot Spares. One or more disks
can be specified. If two or more parameters are specified, they must be specified in the same
order as the associated RAID group identifier parameters. For details, refer to
Syntax" (page
23).
disks
Drive
This parameter specifies the RAID group identifiers to which the Dedicated Hot Spares will be
assigned. One or more RAID group identifiers can be specified. If two or more RAID group
identifiers are specified, they must be specified in the same order as the associated disk
parameters. For details, refer to
rg_numbers
RAID group number
rg_names
RAID group name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
rg_numbers
rg_names
| -rg-name
"1.2.9 RAID Group Syntax" (page
85
}
"1.2.4 Drive
25).
P2X0-1210-05ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents