Fujitsu Eternus DX100 S3 User Manual page 862

Appendix A Error Messages/Error Codes
A.1 Error Messages
Message
number
ED001
ED002
ED003
ED180
ED181
ED182
ED183
ED184
ED185
ED186
ED187
ED190
ED191
ED192
ED193
ED194
ED195
ED196
ED197
Receive failed internal command response.
An internal error has occurred. If this error persists, request your maintenance engineer to investigate the
error.
Internal command retry timeout.
An internal error has occurred. If this error persists, request your maintenance engineer to investigate the
error.
Internal command progress retry timeout.
An internal error has occurred. If this error persists, request your maintenance engineer to investigate the
error.
Flexible Tier Migration is running.
Flexible Tier Migration is running. Wait for a while and try again.
Quick UNMAP is being performed.
Quick UNMAP is being performed. Wait for a while and try again.
The cache LUN size limit is being set.
The cache LUN size limit is being set. Wait for a while and try again.
Because EC is being executed, the processing was discontinued.
A complete EC is running. Wait for a while and try again.
Because OPC is being executed, the processing was discontinued.
A complete OPC is running. Wait for a while and try again.
Because REC is being executed, the processing was discontinued.
A complete REC is running. Wait for a while and try again.
Offloaded Data Transfer is being performed.
An Offloaded Data Transfer is being performed. Wait for a while and try again.
The REC disk buffer volume is associated.
The REC disk buffer volume is associated. Wait for a while and try again.
The internal resources are insufficient.
The internal resources are insufficient. Wait for a while and try again.
The internal resources are insufficient.
The internal resources are insufficient. Wait for a while and try again.
The internal resources are insufficient.
The memory area is insufficient. Wait for a while and try again.
A non-master-CM component received a command.
A non-master-CM component received a command. Wait for a while and try again.
The internal resources are insufficient.
The dynamic allocating memory is insufficient. Wait for a while and try again.
Internal processes are running. Wait for a while and try again.
An internal process is being performed. Wait for a while and try again.
The internal resources are insufficient.
The internal resources are insufficient. Wait for a while and try again.
Number of the processing request is reached the limit.
The internal resources are insufficient. Wait for a while and try again.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Message
Countermeasure for the error
862
P2X0-1210-05ENZ0