Show Sed-Authentication - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.3 System Settings > show sed-authentication

show sed-authentication

This command displays the status of the authentication key registration for SEDs.
■
Syntax
show sed-authentication
■ Parameter
No parameters.
■ Output
SED authentication
■ Example(s)
The following example shows the sed-authentication command when the SED authentication key is
registered:
CLI> show sed-authentication
SED authentication
The following example shows the sed-authentication command when the SED authentication key is not
registered:
CLI> show sed-authentication
SED authentication
Indicates whether the SED authentication key is registered.
[Registered]
[Not Registered]
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
624
P2X0-1210-05ENZ0