Help - Fujitsu Eternus DX100 S3 User Manual

Chapter 8 CLI Original Function
8.1 CLI Environment > help

help

This command displays brief descriptions for all the command names supported by CLI.
■
Syntax
command_name
help [
■ Parameter
command_name
■ Example(s)
The following example has no parameter. Brief descriptions for all the command names are displayed:
CLI> help
copy host-affinity
copy mapping
create community-profile
create eco-schedule
. . . (snip)
]
Optional. This parameter specifies the CLI command name. Either the verb section (the first
part of the CLI command name) or the complete command name can be specified. If omitted,
all the CLI command names are listed.
Examples of correct parameter specifications are as follows:
• CLI> help (no parameter)
• CLI> help show (verb section only)
• CLI> help show mapping (complete command)
• CLI> help show ma (incomplete command but OK)
• The only complete command that matches this is "show mapping".
• An incomplete command that can be uniquely identified is treated as a complete command.
Examples of incorrect parameter specifications are as follows:
• CLI> help mapping (object section only)
• CLI> help sh (incomplete verb section of command)
• CLI> help show m (incomplete object section of command)
"show mapping" and "show migration" are complete commands that match the help string. In
this case, CLI cannot identify a unique command.
- Copy host affinity group associations from a host interface port to other ports.
- Copy the LUN mapping definitions from a specified host interface port to one or more host interface ports.
- Create a SNMP community profile.
- Create one ECO schedule and only one ECO schedule event.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
825
P2X0-1210-05ENZ0