Set Sed-Authentication - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.3 System Settings > set sed-authentication

set sed-authentication

This command sets the authentication key for SEDs. SEDs are used to prevent the leakage of data in case a
disk is stolen or lost.
■ Syntax
set sed-authentication -execution {yes|no}
■ Parameter
-execution
■ Example(s)
The following example sets the authentication key for an SED:
CLI> set sed-authentication
This parameter sets the authentication key for SEDs.
yes The authentication key for SEDs is set.
no The authentication key for SEDs is not set (default).
-execution yes
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
625
P2X0-1210-05ENZ0