Fujitsu Eternus DX100 S3 User Manual page 552

Chapter 5 System Settings and Display
5.2 Network Management > set email-notification
-smtp-over-ssl
-partial-mode
-partial-size Optional. This parameter specifies the part size of an e-mail. It is available when "-partial-
-send-log
-iom-log
-customer-info
Optional. This parameter specifies whether the SMTP over SSL is used. If the SMTP over SSL is
used, the STARTTLS method or the SSL/TLS method can be selected. If this parameter is omit-
ted, SMTP over SSL is not used.
disable SMTP over SSL is not used. (Default)
starttls SMTP over SSL is used with the STARTTLS method.
ssl-tls SMTP over SSL is used with the SSL/TLS method.
Optional. This parameter specifies whether to divide e-mail into parts when sending. If
omitted, the existing setting is not changed. The default value is disabled (e-mails are not
divided).
enable Partial e-mail mode is enabled.
disable Partial e-mail mode is disabled (default).
mode" is enabled, and any mode can be specified. Between 64kb and 6400kb should be
specified for the value (between 64KB and 6400KB). "kb" must be specified after the number.
If omitted, the existing setting is not changed. The ETERNUS DX default value is 64KB (the size
of each e-mail is 64KB).
size
Part size of an e-mail
Optional. This parameter specifies the E-mail log notification mode. This parameter specifies
whether the E-mail log notification function is enabled or not. If omitted, the existing setting
is not changed. The default value is disable.
enable Sending the E-mail log is enabled.
disable Sending the E-mail log is disabled (default).
Optional. This parameter specifies whether the I/O module logs are included. If omitted, the I/
O module logs are included.
enable The I/O module log is included (default).
disable The I/O module log is not included.
Optional. This parameter specifies whether to include customer information in the exported
logs. If this parameter is omitted, customer information is included in the logs.
enable Customer information is included in the logs (default).
disable Customer information is not included in the logs.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
552
P2X0-1210-05ENZ0