Fujitsu Eternus DX100 S3 User Manual page 236

Fujitsu eternus cli user's guide
Hide thumbs Also See for Eternus DX100 S3:
Table of Contents

Advertisement

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show iscsi-parameters
Transfer Rate
Link Status
CmdSN Count
VLAN ID
MTU
Limit Band width
REC Line No.
REC Transfer Mode Sync
REC Transfer Mode Stack
REC Transfer Mode Consistency
REC Transfer Mode Through
TFO Transfer Mode
Multiple VLAN
Available IP Address Information
Transfer speed of the iSCSI port
Actual transfer speed and link status (including "Link Up" and "Link Down")
Number of commands that are simultaneously acceptable from a host
Indicates whether VLAN connection is enabled. (Enable: enabled, Disable: disabled)
When "Enabled" is displayed, the VLAN ID is also displayed.
MTU size
Bandwidth limit (upper limit performance value)
REC line number (0 – 127) (A hyphen (-) is displayed in the field when the port mode is not the
RA mode or the CA/RA auto mode.)
Synchronous mode for the REC transfer mode (Enable: enabled, Disable: disabled) (A hyphen
(-) is displayed in the field when the port mode is not the RA mode or the CA/RA auto mode.)
Asynchronous stack mode for the REC transfer mode (Enable: enabled, Disable: disabled) (A
hyphen (-) is displayed in the field when the port mode is not the RA mode or the CA/RA auto
mode.)
Asynchronous consistency mode for the REC transfer mode (Enable: enabled, Disable:
disabled) (A hyphen (-) is displayed in the field when the port mode is not the RA mode or the
CA/RA auto mode.)
Asynchronous through mode for the REC transfer mode (Enable: enabled, Disable: disabled) (A
hyphen (-) is displayed in the field when the port mode is not the RA mode or the CA/RA auto
mode.)
TFO transfer mode (transfer mode of the Storage Cluster) (Enable: enabled, Disable: disable)
(A hyphen (-) is displayed in the field when the port mode is not the RA mode or the CA/RA
auto mode.)
Indicates whether the multiple VLAN setting is enabled.
Virtual port number for which virtual port information is enabled
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
236
P2X0-1210-05ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents