Set Audit - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.3 System Settings > set audit

set audit

This command changes the general settings of the audit log function. Use the "show audit" command to dis-
play the audit log function settings that are configured by this command.
■ Syntax
set audit [-mode {enable | disable}]
[-server1-function {disable | rfc3164 | rfc5424}]
audit_log_server1
[-server1
[-server1-port {maintenance | remote}]
[-server2-function {disable | rfc3164 | rfc5424}]
audit_log_server2
[-server2
[-server2-port {maintenance | remote}]
■ Parameter
-mode
-server1-function
-server1
] [-server1-port-number
] [-server2-port-number
Optional. This parameter specifies whether to enable the audit log function.
enable The audit log function is enabled.
disable The audit log function is disabled.
Optional. This parameter specifies whether to enable syslog server 1. If omitted, the existing
setting is not changed. If omitted, the existing setting is not changed. This parameter cannot
be specified when the audit log function is disabled.
disable Syslog server 1 is disabled.
rfc3164 Syslog server 1 is enabled and uses message format based on RFC3164.
rfc5424 Syslog server 1 is enabled and uses message format based on RFC5424.
Optional. This parameter specifies syslog server 1. Only one server can be specified. The server
name format should be IPv4 standard notation (a base 256 "d.d.d.d" string), IPv6 address
format, or a fully qualified domain name (FQDN). The types of IPv6 addresses that can be
specified are global addresses (including 6to4 addresses), link local addresses, and unique
local addresses. Up to 63 alphanumeric characters can be specified. If omitted, the existing
setting is not changed. This parameter cannot be specified when the audit log function is dis-
abled.
Example: -server1 192.168.1.20
Example: -server1 fd80::abd0:223:ad
Example: -server1 foo.bar
audit_log_server1
Server name of syslog server 1
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
port_number
]
port_number
]
632
P2X0-1210-05ENZ0