Fujitsu Eternus DX100 S3 User Manual page 60

Chapter 2 Status Display
2.1 Storage System Status > show fru-de
Active EC
Next EC
Firmware Version
DE#n IOM#m Internal Parts Status/Status Code (n: The drive enclosure number, m: The IOM number)
SAS Cable (IOM Port) #0(IN)
Error Code
SAS Cable (IOM Port) #1(OUT)
Error Code
IOM FEM Port#0
Error Code
IOM FEM Port#1
Error Code
The following table shows the output information for the Fan Expander Modules.
DE#n FEM#m Information (n: The drive enclosure number, m: The FEM number)
(Information on FEM#1 appears regardless of the number of controllers)
Status/Status Code
Error Code
EC number of the active firmware (current operating firmware)
EC number of the stand-by firmware (the generation number of the firmware after the
next power cycle)
Version of the active firmware (current operating firmware)
SAS Cable #0(IN)(IOM port #0) status and the status code
Error code to identify error events that have occurred in port#0.
This information is only displayed when the Status is not "Normal" or "Undefined".
SAS Cable #1(OUT)(IOM port #1) status and the status code
Error code to identify error events that have occurred in port#1.
IOM FEM port#0 status and the status code (only for high-density drive enclosures)
The connection destination of this port is the FEM#1 EXP#0 port.
Error code to identify error events that have occurred in port#0 (only for high-density
drive enclosures).
IOM FEM port#1 status and the status code (only for high-density drive enclosures)
The connection destination of this port is the FEM#1 EXP#1 port.
Error code to identify error events that have occurred in port#1 (only for high-density
drive enclosures).
FEM (FEM#n) status and the status code
Error code to identify error events that occurred in a Fan Expander Module.
This information is only displayed when the Status is not "Normal" or "Undefined".
60
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0