Chapter 3 Configuration Settings and Display
3.1 RAID Group Management > show eco-mode
show eco-mode
This command displays the current Eco-mode status and parameter settings.
■
Syntax
show eco-mode
■
Parameter
No parameters.
■
Output
Mode
Host I/O Monitoring Time
Disk Motor Control Limit Count
■
Example(s)
The following example displays the current Eco-mode settings:
CLI> show eco-mode
Mode
Host I/O Monitoring Time
Disk Motor Control Limit Count [5]
Indicates whether the Eco-mode function is enabled.
Monitoring interval time of the host I/O
Number of times that a disk motor will power off and on in one day
[Enable]
[60 min.]
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
89
P2X0-1210-05ENZ0