Set Nas-Server - Fujitsu Eternus DX100 S3 User Manual

Chapter 7 NAS Function Setting and Display
7.6 NAS Server Configuration > set nas-server

set nas-server

This command configures the NAS Server.
■
Syntax
set nas-server [-server-name
■ Parameter
-server-name
-priority
■
Example(s)
The following example shows settings for assigning the server name to FOOSERVER:
CLI> set nas-server -server-name FOOSERVER
The following example shows settings for resetting the server name to the default values:
CLI> set nas-server -server-name ""
The following example shows settings for assigning priority to CIFS:
CLI> set nas-server -priority cifs
server_name
Optional. This parameter specifies the server name using 1-15 characters.
Alphanumeric characters and hyphens (-) can be used. However, a hyphen (-) cannot be used
as the first and/or the last character of the server name.
To reset the server name back to the default value, use the NULL character (""). The default
value is a string of characters that starts with "DX" followed by the serial number of the device
(10 digit).
server_name
Sets the server name.
"" Resets the server name to the default values.
Optional. This parameter specifies services to be processed on a priority basis.
default Default priority
nfs NFS service is given priority.
cifs CIFS service is given priority
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
] [-priority {default|nfs|cifs}]
792
P2X0-1210-05ENZ0