Fujitsu Eternus DX100 S3 User Manual page 864

Appendix A Error Messages/Error Codes
A.1 Error Messages
Message
number
ED1AE
ED1AF
ED1B0
ED1B1
ED1B2
ED1B3
ED1B4
ED1B5
ED1B6
ED1B7
ED1B8
ED1B9
ED1BA
ED1BB
ED1BC
ED1BD
ED1BE
ED1BF
ED1C0
ED1C1
Upgrade Dirty Recovery is running.
An Upgrade Dirty Recovery is running. Wait for a while and try again.
Degrade Dirty Recovery is running.
A Degrade Dirty Recovery is running. Wait for a while and try again.
Remote Maintenance is running.
Remote Maintenance is running. Wait for a while and try again.
Command Lock is being processed.
An internal process is being performed. Wait for a while and try again.
The configuration is being changed.
The configuration is being changed. Wait for a while and try again.
Bind In Cache (Extent) is set.
Bind In Cache (Extent) is set.
Data Migration is running.
Data Migration is running. Wait for a while and try again.
Logical Device Expansion is running.
Logical Device Expansion is running. Wait for a while and try again.
Write Through is running.
Write Through is running. Wait for a while and try again.
An encryption process or a decryption process is running.
An encryption process or a decryption process is running. Wait for a while and try again.
Bind In Cache is set.
Bind In Cache is set.
Some of the spinup or spindown operations failed.
Some of the spinup or spindown operations failed. Wait for a while and try again.
Eco-mode schedule suspension timeout occurred.
An Eco-mode schedule suspension timeout occurred. Wait for a while and try again.
All of the spinup and spindown operations failed.
All of the spinup and spindown operations failed. Wait for a while and try again.
There is an encryption volume.
There is an encrypted volume.
Operation Mode is not in "Maintenance Mode"
The Maintenance mode is not set.
A Storage Migration path is set or Storage Migration is running.
A Storage Migration path is set or Storage Migration is running.
Extended Copy is running.
An Extended Copy is running. Wait for a while and try again.
An error occurred in the module.
An error occurred in the module. Check the module status.
An error occurred in the CM.
An error occurred in the CM.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Message
Countermeasure for the error
864
P2X0-1210-05ENZ0