Show Snap-Data-Volume - Fujitsu Eternus DX100 S3 User Manual

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management > show snap-data-volume

show snap-data-volume

This command displays all the registered Snap Data Volumes (SDV). The SDVs that are displayed can also be
narrowed down by using the option parameter. The display includes the logical size, the physical size, the
used size, and various other items.
■ Syntax
show snap-data-volume [-volume-number
■ Parameter
-volume-number
or
-volume-name
■
Output
Volume
Status
Size(MB)
Logical Size(MB)
Physical Size(MB)
Host Used Size(MB)
Copy Used Size(MB)
Host SDP Using Size(MB)
Optional. This parameter specifies the Snap Data Volume (SDV) identifiers that are to be
displayed. One or more SDVs can be specified at the same time. If this parameter is omitted, all
the SDVs are displayed. For details, refer to
volume_numbers
SDV number
volume_names
SDV name
SDV identifiers
No. SDV number
Name SDV name
SDV status
SDV size (unit: MB)
Logical size of SDV (unit: MB)
Physical size of SDV (unit: MB)
Size that is used by hosts (unit: MB)
Size that is used for copy sessions (unit: MB)
Size of the area in the Snap Data Pool (SDP) that is used by hosts (unit: MB)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
volume_numbers | -volume-name
"1.2.10 Volume Syntax" (page
408
volume_names ]
26).
P2X0-1210-05ENZ0