Set Email-Notification - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.2 Network Management > set email-notification

set email-notification

This command sets up parameters relating to E-mail notification functions.
■
Syntax
set email-notification [-send {enable|disable}] [-port {maintenance|remote|fst}]
[-port-number
[-authentication {none|auto|cram-md5|plain|login}] [-user
address
[-to1 {
[-text-count
strings
[-text5 {
strings
[-text10 {
[-connection-timeout
[-send-log {enable|disable}] [-iom-log {enable|disable}] [-customer-info {enable|disable}]
■ Parameter
-send
-port
-port-number
port_number smtp_server
] [-server
address
| ""}] [-to2 { | ""}] [-to3 {
count strings
] [-text1 { | ""}] [-text2 {
strings
| ""}] [-text6 { | ""}] [-text7 {
count
| ""}] [-retry-count
seconds
] [-partial-mode {enable|disable}] [-partial-size
Optional. This parameter specifies the E-mail notification mode. It specifies whether the E-
mail notification function is enabled or not. If this parameter is omitted, the status is not
changed. The initial value is disabled. All necessary parameters to send E-mail must be
specified when enabling this parameter.
enable E-mail notification is enabled.
disable E-mail notification is disabled (default).
Optional. This parameter specifies the Ethernet port to connect to an SMTP Server. If omitted,
the existing setting is not changed. For details, refer to
(page 35).
maintenance
MNT port
remote RMT port
fst FST port (ETERNUS DX500 S3/DX600 S3 only)
Optional. This parameter specifies the port number to connect to an SMTP server. If omitted,
the existing setting is not changed. The initial value is 25.
port_number
Port number
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
] [-smtp-over-ssl {disable|starttls|ssl-tls}]
user_name
address address
| ""}] [-to4 {
strings
| ""}] [-text3 {
strings
| ""}] [-text8 {
interval
] [-retry-interval ] [-timeout
548
][-from mail_address ]
address
| ""}] [-to5 { | ""}]
strings strings
| ""}] [-text4 {
strings strings
| ""}] [-text9 {
seconds
]
size
]
"1.11 Note for Specifying FTP Server"
P2X0-1210-05ENZ0
| ""}]
| ""}]