Fujitsu Eternus DX100 S3 User Manual page 561

Chapter 5 System Settings and Display
5.2 Network Management > set event-notification
e-not-ready When Not-Ready occurs, error level events are notified. Host sense, SNMP, E-
mail, and syslog may be specified as the notice method.
e-remote-path-with-transfer
When an REC path error (with data transfer) occurs, error level events are
notified. Any notice method may be specified.
e-remote-path-without-transfer
When an REC path error (without data transfer) occurs, error level events are
notified. Any notice method may be specified.
e-halt-path When REC path(s) are halted due to a path(s) error, error level events are
notified. SNMP, E-mail, and REMCS may be specified as the notice method.
e-halt-overload
When REC path(s) are halted due to line overload, error level events are notified.
SNMP, E-mail, and REMCS may be specified as the notice method.
e-halt-other When REC path(s) are halted due to another cause, error level events are
notified. SNMP, E-mail, and REMCS may be specified as the notice method.
e-tp-pool-ratio
When the transition of the thin provisioning pool ratio increases, error level
events are notified. SNMP, E-mail and syslog may be specified as the notice
method.
e-redundant When the redundant copy starts or ends, error level events are notified. Any
notice method may be specified.
e-sed-network-error
When network connection errors occur with the key server, error level events are
notified. SNMP, E-mail, REMCS, syslog, and AIS Connect may be specified as the
notice method.
e-copy-session-error
When an error occurs for a copy session or an abnormal copy session disappears,
error level events are notified. SNMP, E-mail, REMCS, and syslog may be specified
as the notice method.
e-nas-io-error
When NAS I/O is in Error status, error level events are notified. SNMP, E-mail,
REMCS, syslog, and AIS Connect may be specified as the notice method. This
option can be specified when the NAS function is enabled.
e-tfo-state-auto-changed
When Storage Cluster Active/Standby is automatically switched (Standby->Active
or Active->Standby), error level events are notified. SNMP, E-mail, REMCS, syslog,
and AIS Connect may be specified as the notice method.
e-tfo-state-manual-changed
When Storage Cluster Active/Standby is switched manually (Standby->Active or
Active->Standby), error level events are notified. SNMP, E-mail, REMCS, syslog,
and AIS Connect may be specified as the notice method.
e-storage-cluster-controller-disconnected
When communication with the Storage Cluster Controller is disconnected, error
level events are notified. SNMP, E-mail, REMCS, syslog, and AIS Connect may be
specified as the notice method.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
561
P2X0-1210-05ENZ0