Fujitsu Eternus DX100 S3 User Manual page 349

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-response
TPGS Mode
TPG Referrals
Inquiry Command
Peripheral Device Type
(Peripheral Device Addressing)
Peripheral Device Type
(Flat Space Addressing)
SCSI Version
NACA
Device ID Type
Product ID
Test Unit Ready Command
Response Status for Reservation
Sense
Change Volume Mapping
Change Volume Capacity
Vendor Unique Sense
Other
Command Monitoring Time
Load Balance Response Status
iSCSI Discovery Reply Mode
Indicates whether Target Port Group Support (TPGS) is enabled
Indicates whether the TPG Referrals function is enabled
Inquiry Command setting information category
Peripheral Device Type for unconnected LUNs in the Peripheral Device Addressing mode
Peripheral Device Type for LUN0 in the Flat Space Addressing mode
SCSI version
Indicates whether the NACA bit is set
Designator Type, which includes information for identification of the logical unit in the
Device ID page
Indicates whether the default product ID (ETERNUS DX S3 series or ETERNUS DX200F) is
responded or the product ID for the ETERNUS DX S2 series is responded.
Test Unit Read Command setting information category
Response status for reservation
Sense setting information category
Indicates whether a change in volume mapping is notified
Indicates whether a change in the volume capacity is notified
Indicates whether a vendor unique sense code is notified
Other setting information category
Monitoring time for command executions
Response status for load balancing
iSCSI Discovery response mode
349
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0