Forced Online - Fujitsu Eternus DX100 S3 User Manual

Chapter 7 NAS Function Setting and Display
7.10 NAS Function Restoration > forced online

forced online

This command will attempt to bring the component online without replacing it.
Without a Maintenance Operation policy, only "cmX-nas-engine" or "cmX-nas-sysvol" can be selected.
■ Syntax
forced online -type
■ Parameter
-type
■ Example(s)
The following example forcibly enables the NAS Engine in CM#0:
CLI> forced online -type cm0-nas-engine
The following example forcibly enables the NAS System Volume in CM#1:
CLI> forced online -type cm1-nas-sysvol
type_name
This parameter specifies the name of the component to be forced online. Only one component
can be specified at the same time.
cm0-nas-engine
cm1-nas-engine
NAS Engine. This option can only be specified when the NAS function is enabled.
This option enables the specified NAS Engine
cm0-nas-sysvol
cm1-nas-sysvol
NAS System Volume. This option can only be specified when the NAS function is
enabled. After a System Volume (Root FS) of the NAS Engine is recovered, the
specified NAS Engine is enabled.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
820
P2X0-1210-05ENZ0