Fujitsu Eternus DX100 S3 User Manual page 259

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > create host-wwn-name
-new-host-group-name
■ Example(s)
The following example registers host alias "HBA1". The WWN
is "e000000000e0e000" and host response #1 is assigned:
CLI> create host-wwn-name -wwn e000000000e0e000 -name HBA1 -host-response-number 1
The following example registers host alias "HBA1". The WWN is "e000000000e0e000". The registered host
alias is added to host group "HG1":
CLI> create host-wwn-name -wwn e000000000e0e000 -name HBA1 -host-group-name HG1
The following example registers host alias "HBA1". The WWN is "e000000000e0e000" and host response #1
is assigned. The registered host alias is added to host group "HG2", which is created in host response #1:
CLI> create host-wwn-name -wwn e000000000e0e000 -name HBA1 -host-response-number 1 -new-host-group-name HG2
Optional. This parameter specifies a new host group name. Only one host group can be
specified at the same time. For details, refer to
new_host_group_name
New host group name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
"1.2.17 Host Group Syntax" (page
259
30).
P2X0-1210-05ENZ0