Fujitsu Eternus DX100 S3 User Manual page 240

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set iscsi-parameters
-multiple-vlan
-additional-ip
-additional-ip-function
-host-affinity
Optional. This parameter specifies whether the multiple VLAN setting is enabled.
When this parameter is specified, multiple port numbers or the "-all" option cannot be speci-
fied for the "-port" parameter.
When "disabled" is specified, the virtual port information for the ports that are specified with
the "-port" parameter is deleted.
When this parameter is specified, the "-additional-ip" parameter and the "-additional-ip-func-
tion" parameter cannot be specified.
This parameter can only be specified when the port mode of the ports that are specified with
the "-port" parameter is the CA mode or the CA/RA auto mode.
When this parameter is specified, only the "-port" parameter can be specified.
enable The multiple VLAN function is enabled.
disable The multiple VLAN function is disabled.
Optional. This parameter specifies the virtual port number that is set for the target port.
When this parameter is specified, multiple port numbers or the "-all" option cannot be speci-
fied for the "-port" parameter.
This parameter can only be specified when the port mode of the ports that are specified with
the "-port" parameter is the CA mode or the CA/RA auto mode and the VLAN function is
enabled.
When this parameter is specified, only the parameters that can be specified for the multiple IP
address setting can be specified together.
additional-ip
Target virtual port number (1 – 15)
Optional. This parameter specifies whether the target virtual port is enabled.
When "disable" is specified, the virtual port information of the port that is specified with the "-
additional-ip" parameter is deleted.
When "disable" is specified, only the "-port" parameter and the "-additional-ip" parameter can
be specified together.
This parameter can only be specified when the port mode for the ports that are specified with
the "-port" parameter is the CA mode or the CA/RA auto mode, the multiple IP address setting is
enabled, and the VLAN function is enabled.
enable The target virtual port is enabled.
disable The target virtual port is disabled.
Optional. This parameter specifies the Host Affinity Mode. If omitted, the existing setting is not
changed. Host affinity is a security mechanism used to restrict access by a given host to only a
specific set of LUNs. This parameter cannot be specified when the port is set to the RA mode.
enable Host Affinity Mode is enabled.
disable Host Affinity Mode is disabled.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
240
P2X0-1210-05ENZ0