Fujitsu Eternus DX100 S3 User Manual page 846

Appendix A Error Messages/Error Codes
A.1 Error Messages
Message
number
E5372
E5373
E5374
E5375
E5376
E5377
E5378
E5379
E5380
E5381
E5382
E5383
E5384
E5385
In the remote old model storage, the specified copy range is overlap with the copy range in an existing
session.
The scope of some sessions overlap each other in the connection destination ETERNUS storage system
that is an older model.
In the remote old model storage, status of session or status of volume is error.
The session status or the LU status is not normal in the connection destination ETERNUS storage system
that is an older model.
In the remote old model storage, the number of copy sessions exceeds the allowable maximum copy
sessions.
The number of sessions exceeds the maximum number in the connection destination ETERNUS storage
system that is an older model.
In the remote old model storage, the new copy session overlap with the existing one's. The new copy
session cannot be started.
The copy destination of a new session overlaps the copy destination of an existing session in the
connection destination ETERNUS storage system that is an older model.
In the remote old model storage, error occurred about setting of the copy table or status of REC Buffer.
The copy table setting or the REC buffer status is not normal in the connection destination ETERNUS
storage system that is an older model.
In the remote old model storage, the specified copy volume is a "SDV".
An SDV is specified for the copy volume in the connection destination ETERNUS storage system that is an
model.
In the remote old model storage, an error occurred in the copy path connection.
A communication error between the ETERNUS storage systems occurred in the connection destination
ETERNUS storage system that is an older model.
An unsupported command was issued by the remote old model storage.
An unsupported command for communication between ETERNUS storage systems is issued from the
connection destination ETERNUS storage system that is an older model.
In the remote old model storage, copy session has been already set.
The session is already set in the connection destination ETERNUS storage system that is an older model.
In the remote old model storage, copy session has been already deleted.
The session is already deleted in the remote ETERNUS storage system that is an older model.
In the remote old model storage, copy session is already in "Suspend" status or changing to be "Suspend"
status.
An asynchronous session is being transitioned to Suspend status or the session is in Suspend status in the
connection destination ETERNUS storage system that is an older model.
In the remote old model storage, copy session status is already in "Active" status.
The session is in Active status in the connection destination ETERNUS storage system that is an older
model.
In the remote old model storage, no copy license.
No copy license is registered in the connection destination ETERNUS storage system that is an older
model.
In the remote old model storage configuration, the specified BoxID cannot be found.
The specified Box ID information cannot be found in the connection destination ETERNUS storage system
that is an older model.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Message
Countermeasure for the error
846
P2X0-1210-05ENZ0