Fujitsu Eternus DX100 S3 User Manual page 438

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management > show rec-path
Status
Remote Port WWN / iSCSI Name (IP Address)
Error detail description(s)
■ Example(s)
The following example displays a list of remote storage systems connected to this system. In this case, an
error in the path information status is indicated with a "*" mark.
CLI> show rec-path
Remote Storage System
E Remote Box ID
- ---------------------------------------- --------- ---------- ---------- ------- ----------- -------- -------------
00DXL#########ET06F21AUABCPJ000002###### Direct
* 00DXL#########ET06F21AUABCPJ000004###### Switched
00DXL#########ET06F21AUABCPJ000006###### Switched
The following example displays the path information details for the specified storage system. Note that if
spaces or hash mark (#) characters are used, the Box ID must be specified with double quotations ("):
CLI> show rec-path -remote-boxid "00DXL#########ET06F21AUABCPJ000000######"
Storage Information
Local Box ID (Current Storage System) 00DXL#########ET06F21AUABCPJ000001######
Remote Box ID
Line Information
Path Type
Effective Line Speed
Round Trip Time
Current Multiplicity
Recommended Multiplicity
Priority Level
Copy Schedule Mode
Path Information (to Remote Storage System)
Local Port
---------------- ----------------- -----------------------------------------
CM#0 CA#0 Port#0 Normal
CA#0 Port#1 Error [I T
CA#0 Port#2 Error [R
CM#1 CA#1 Port#2 Error [C
CM#1 CA#2 Port#0 Error [B
Error detail description(s)
R: The copy path between the local device and remote device is in unstable status.
For example, link-down repeatedly occurs in a certain period of time or communication fails.
B: The resolution settings are different between the local device and remote device.
T: The error occurs in the FC-RA port or iSCSI-RA port on the remote device.
C: The error occurs in the cable.
I: The error occurs in the FC-RA port or iSCSI-RA port on the local device.
Path status ("Error", "Warn", or "Normal") between the local storage system and the
remote storage system. When the path status is not normal, this information is fol-
lowed by symbols that indicate the place that is suspected to have an error or the rea-
son for the warning. The details of the symbols are displayed under "Error detail
description(s)".
World Wide Name (WWN) of FC-RA of the remote storage system or iSCSI name and IP
address of iSCSI-RA (for connecting older models) of the remote storage system.
Symbols that indicate the place that is suspected to have an error and detailed descrip-
tions of the symbols. These descriptions appear only when the path status is not nor-
mal.
Path Type Line Speed Round Trip Multiplicity
00DXL#########ET06F21AUABCPJ000000######
Switched
10 (Mbit/s)
12 (ms)
Auto
3
-
Session balancing
Status Remote Port WWN / iSCSI Name (IP Address)
500000E0D0C40005
] 500000E0D0C40006
Error [T ] 500000E0D0C40087
Normal 500000E0D0C40086
] 500000E0D0C40007
] 500000E0D0C40006
] 500000E0D0C40085
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
(Mbit/s) Time (ms) Current/Recommended Level
- - -
10 20 4
10 Unknown 4
438
Priority Copy Schedule
Mode
- 3 Session
3 - Destination
3 - Session
P2X0-1210-05ENZ0