Expand Thin-Pro-Pool - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.3 Thin Provisioning Pool Management > expand thin-pro-pool

expand thin-pro-pool

This command expands the capacity of an existing Thin Provisioning Pool with the specified disks and
assigned cm. A Thin Provisioning Pool can be expanded by adding a new RAID group.
■ Syntax
expand thin-pro-pool {-pool-number
-rg-mode {auto|manual} [-disks
■ Parameter
-pool-number
or
-pool-name
-rg-mode
-disks
-capacity
pool_number
disks ] [-capacity
This parameter specifies the Thin Provisioning Pool identifiers.
Only one Thin Provisioning Pool identifier can be specified. For details, refer to
Provisioning Pool Syntax" (page
pool_number
Thin Provisioning Pool number
pool_name
Thin Provisioning Pool name
This parameter specifies the method of selecting the drive when creating the new RAID group.
auto The drive is automatically allocated. The capacity of the disk is specified with the
"-capacity" parameter.
manual The drive is manually allocated. The disk is specified with the "-disks" parameter.
Optional. This parameter specifies which disks are used to configure the RAID group. This
parameter can only be specified when "-rg-mode manual" is selected. One or more disks can
be specified at the same time. For details, refer to
disks" is specified, "-capacity" cannot be specified.
disks
Drive
Optional. This parameter specifies the total capacity of the disks that are used to create a RAID
group. This parameter can only be specified when "-rg-mode auto" is specified. The disk that
corresponds to the capacity is automatically set. When "-capacity" is specified, "-disks" cannot
be specified.
capacity
Total capacity of the disks that are used to create a RAID group
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
pool_name
| -pool-name
capacity ] [-assigned-cm {0 | 1 | auto}]
23).
"1.2.4 Drive Syntax" (page
188
}
"1.2.6 Thin
23). When "-
P2X0-1210-05ENZ0