Fujitsu Eternus DX100 S3 User Manual page 536

Chapter 5 System Settings and Display
5.2 Network Management > set community-profile
■ Example(s)
The following example sets the SNMP community. SNMP manager numbers 1 to 10 are specified, and the
SNMP MIB view name is "xview4":
CLI> set community-profile -community community1 -manager-number 1-10 -view xview4
The following example sets the SNMP community in which the SNMP community is named "community2",
the SNMP manager number is 2, and the SNMP MIB view is able to access all MIB views:
CLI> set community-profile -community community2 -manager-number 2 -view xview4
The following example sets an SNMP community that is used only for traps.
CLI> set community-profile -community community3 -manager-number 3 -view ""
The following example sets an SNMP community for which unlimited access is specified:
CLI> set community-profile -community community4 -manager-number none -view xview6
536
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0