Show Rec-Path - Fujitsu Eternus DX100 S3 User Manual

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management > show rec-path

show rec-path

This command is used to display the detailed REC path information of a system, and also displays the status of
any remotely connected devices. If this parameter is omitted, the information regarding all remote storage
systems is listed. If this parameter is specified, the path information for a single device can be displayed.
■ Syntax
show rec-path [-remote-boxid
■ Parameter
-remote-boxid
■ Output
When the parameter is omitted:
E
Remote Box ID
Path Type
Line Speed (Mbit/s)
Round Trip Time (ms)
remote_storage_box_id
Optional. This parameter specifies the Box ID of the storage system whose REC path
information details are to be displayed. Only one Box ID can be specified at a time. If this
parameter is omitted, a list of the storage system and its remote storage systems is displayed
• Box IDs use a maximum of 40 alphanumeric characters, spaces, and pound key characters
(#).
• All alphabetic characters are handled as uppercase.
• The pound key characters (#) are automatically appended when the input characters are
less than 40.
remote_storage_box_id
Box ID
Error sign. If "*" mark is output, it means that path information status between storage
systems is not normal. You can check details by trying this command with this remote
Box ID.
Box ID of a remote storage system registered in the system
Connection form of a remote storage system registered in the system
Effective line speed of a remote storage system registered in the system
Round trip time of a remote storage system registered in the system. If a round trip time
is not measured, "Unknown" is displayed.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
]
436
P2X0-1210-05ENZ0