Show Smi-S - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.2 Network Management > show smi-s

show smi-s

This command displays whether the SMI-S functions are enabled or disabled.
■
Syntax
show smi-s
■ Parameter
No parameters.
■ Output
SMI-S
■ Example(s)
The following example displays the SMI-S functions:
CLI> show smi-s
SMI-S
Indicates whether all of the SMI-S functions are currently enabled.
[Enable]
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
570
P2X0-1210-05ENZ0