Fujitsu Eternus DX100 S3 User Manual page 426

Fujitsu eternus cli user's guide
Hide thumbs Also See for Eternus DX100 S3:
Table of Contents

Advertisement

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management
box-id
device-type
cmX-caY-portZ Define the World Wide Name (WWN) or iSCSI parameters of a host interface port set to RA
Defines a Box ID for the target storage system. Note the following:
The Box ID value must be double-quoted ("").
Lowercase characters are automatically converted to uppercase.
Hash marks (#) are automatically appended to Box IDs shorter than 40 characters in length.
The Box ID can be confirmed using the "show boxid" command.
box-id "00DXL#########ET06F21AUABCPJ000000######"
Defines a device type for the target storage system. The storage system is specified by two
numbers that indicate the unit type and the unit sub type.
The meaning of these numbers are shown in the table below.
Storage series / models
ETERNUS DX100 S3/DX200 S3
ETERNUS DX500 S3/DX600 S3
ETERNUS DX200F
Examples are shown below.
device-type 4, 5
mode or CA/RA auto mode in the target storage system. The X in a label name is the
controller module number and the Y is the host interface port number on the controller.
Note the following points (in this case, all of the host interface ports on CM#0 are defined):
RA mode or CA/RA auto mode can be switched by using the "set host-port-mode"
command.
Host interface port WWNs or iSCSI name may be confirmed using the "show fru-ce"
command.
The limitation for the number of characters for each iSCSI parameter is as follows:
-
iSCSI name: At least 4 and a maximum of 223.
-
RA port CHAP authentication username: At least 1 and a maximum of 63.
-
RA port CHAP authentication password: At least 12 and a maximum of 32.
-
When CHAP authentication is disabled, CHAP authentication username and password
should be omitted.
-
Alias: At least 0 and a maximum of 31, which must be enclosed with double
quotations (").
Examples are shown below.
cm0-ca0-port0 40000000abc80e38
cm0-ca0-port1 40000000abc80e3a
cm0-ca3-port2 40000000abc80e3c
cm0-ca3-port3 40000000abc80e3e
Example host interface port iSCSI parameter definitions:
cm0-ca0-port0 iqn.2010-12.com.fujitsu:storage-system.eternus-
dx400:00040080,10.11.12.13,eternus,bamboo,"eternus000"
cm1-ca1-port1 iqn.2010-12.com.fujitsu:storage-system.eternus-
dx400:00040080,10.11.12.22,,,""
cm1-ca0-port0 iqn.2010-12.com.fujitsu:storage-system.eternus-dx400:00040080,fe80::250,,,""
cm1-ca1-port1 iqn.2010-12.com.fujitsu:storage-system.eternus-
dx400:00040080,2000:100::10:1:0:250,,,""
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Unit type
5
5
5
426
Unit sub type
7
8
7
P2X0-1210-05ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents