Show Fru-De - Fujitsu Eternus DX100 S3 User Manual

Chapter 2 Status Display
2.1 Storage System Status > show fru-de

show fru-de

This command displays the status of the components (Field Replaceable Units) in the drive enclosures.
■
Syntax
show fru-de [-de
■ Parameter
-de
-type
■
Output
The following table shows the output information for the IOM.
DE#n IOM#m Information (n: The drive enclosure number, m: The IOM number)
Status/Status Code
Error Code
WWN
enclosure_number
] [-type {iom0|iom1|fem0|fem1|psu0|psu1|psu2|psu3}]
Optional. This parameter specifies the drive enclosure number. Only one parameter can be
specified. For details, refer to
omitted, all of the connected drive enclosures are displayed.
Example: -de 1
(Only the drive enclosure #1)
Optional. This parameter specifies the target component (FRU) name. The sub components
embedded in a drive enclosure will also be displayed. Only one parameter can be specified. If
this parameter is omitted, all of the FRUs are displayed.
iom0 Details and status of the I/O module #0
iom1 Details and status of the I/O module #1
fem0 Details and status of the Fan Expander Module #0 (only for high-density drive
enclosures)
fem1 Details and status of the Fan Expander Module #1 (only for high-density drive
enclosures)
psu0 Details and status of the Power Supply Unit #0
psu1 Details and status of the Power Supply Unit #1
psu2 Details and status of the Power Supply Unit #2 (only for high-density drive enclo-
sures)
psu3 Details and status of the Power Supply Unit #3 (only for high-density drive enclo-
sures)
IOM#n status and the status code
Error code to identify error events that have occurred in an expander.
This information is only displayed when the Status is not "Normal" or "Undefined".
World Wide Name (For FEM#1, a hyphen (-) is shown.)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
"1.2.3 Drive Enclosure Syntax" (page
59
22). If this parameter is
P2X0-1210-05ENZ0