Expand Raid-Group - Fujitsu Eternus DX100 S3 User Manual

Fujitsu eternus cli user's guide
Hide thumbs Also See for Eternus DX100 S3:
Table of Contents

Advertisement

Chapter 3 Configuration Settings and Display
3.1 RAID Group Management > expand raid-group

expand raid-group

This command expands a RAID group (Logical Device Expansion). The capacity of an existing RAID group is
expanded by adding new disks to the RAID group. A new RAID level can also be specified. Any volumes in the
existing RAID group are relocated to the new RAID group.
RAID5+0 is not supported, not even for pure capacity expansion operations.
Expanding a RAID level other than RAID0 to RAID0 is not supported.
When RAID group capacity is expanded without changing the RAID level, specify only the new disks to be added for the
"-disks" parameter.
If the RAID level is changed with RAID group expansion, at least one disk that is already configured in an expansion
source RAID group and all the new disks that are to be added must be specified for the '-disks' parameter.
Syntax
expand raid-group {-rg-number
disks
-disks
Parameter
-rg-number
or
-rg-name
-disks
-level
-name
rg_number
[-level {0|5|6|10}] [-name
This parameter specifies a RAID group identifier. Only one RAID group identifier can be
specified. For details, refer to
rg_number
RAID group number
rg_name
RAID group name
This parameter specifies the disks to add to a RAID group. One or more parameters can be
specified. This parameter specifies the disk numbers for the disks that configure the RAID
group before expansion and the numbers for the disks that are to be added. For details, refer
to
"1.2.4 Drive Syntax" (page
disks
Drive
Optional. This parameter specifies the new RAID level of the expanded RAID group. RAID5+0
level is not supported.
0
RAID0
5
RAID5
6
RAID6
10
RAID1+0
Optional. This parameter specifies the new RAID group name to be used for the expanded RAID
group. For details, refer to
"1.2.5 Alias Name Syntax" (page
names
RAID group name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
rg_name
| -rg-name
}
name
]
"1.2.9 RAID Group Syntax" (page
23).
80
25).
23).
P2X0-1210-05ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents