Set Lu-Qos-Group - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set lu-qos-group

set lu-qos-group

This command performs detailed settings of the LU QoS Group.
■
Syntax
set lu-qos-group -lu-qos-group
■ Parameter
-lu-qos-group
-lun
-bandwidth-limit
lu_qos_group_number
This parameter specifies the LU QoS Group number to set for LU QoS.
Any value between 0 to 1055 can be specified.
lu_qos_group_number
LU QoS Group number
This parameter specifies the Host-LUN that is to be set. Any value between 0 and 1023 can be
specified. Two or more Host-LUNs can be specified.
Example: -lun 1,2 -lun 0-10 -lun 1,2-9
lun
Host-LUN (0 – 1023)
This parameter specifies the bandwidth limit (upper limit performance value) for the Host-
LUN. Any value between 0 (unlimited) and 15 (Max) can be specified. Two or more values can
be specified. When two or more values are specified, the same number of values as the Host-
LUNs that are specified by the "-lun" parameter must be specified.
Example: -bandwidth-limit 1,2
-bandwidth-limit 0-10
-bandwidth-limit 1,2-9
The same "-bandwidth-limit" parameter value can be specified for multiple "-lun" parameter
values.
Example: -lun 1,2,4 -bandwidth-limit 1
bandwidth-limit
Bandwidth limit (upper limit performance value) for the Host-LUN (0 - 15)
0
1
2
3
4
5
6
7
8
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
luns
-lun -bandwidth-limit
Unlimited
15,000 IOPS (800MB/s)
12,600 IOPS (700MB/s)
10,020 IOPS (600MB/s)
7,500 IOPS (500MB/s)
5,040 IOPS (400MB/s)
3,000 IOPS (300MB/s)
1,020 IOPS (200MB/s)
780 IOPS (100MB/s)
374
bandwidth-limit
P2X0-1210-05ENZ0