Fujitsu Eternus DX100 S3 User Manual page 94

Fujitsu eternus cli user's guide

Hide thumbs Also See for Eternus DX100 S3:

Table of Contents

Chapter 3 Configuration Settings and Display

3.1 RAID Group Management > create eco-schedule

Example: Correct -> -event-type every-week,mon,fri

(from Monday to Friday is OK)

Example: Incorrect -> -event-type every-week,fri,tue

(from Friday to Tuesday is not OK)

Example: Correct -> -event-type every-week,mon,mon

(only Monday is OK)

specific-day The Eco-mode schedule is applied to a specific day. This format is "specific-

day,MMDD,R". The specific month MM (01 – 12) and the specific day DD (01 –

31) are separated by a comma (,) (when every month is required, specify "em"

instead of 01 – 12). When the last day of the month is required, specify "99"

instead of 01 – 31. The number of days that the schedule will apply is specified

as R, and a value between 1 – 7 can be set.

Example: -event-type specific-day,0501,3

(For three days, from May 1st to May 3rd)

Example: -event-type specific-day,0630,2

(For two days, from June 30th to July 1st)

The Eco-mode schedule is applied to a specific week. This format is "specific-

week,MM,W,STA,END". The specific month MM (01 – 12) and the specific week W

(1st, 2nd, 3rd, 4th, or last) are separated by a comma (,) (when every month is

required, specify "em" instead of 01 – 12). The start day of the week (STA) and

the end day of the week (END) are separated by a comma (,). The day of the

week must be specified in the following format. The end day of the week must be

after the start day of the week. The first day starts from Monday.

Example: -event-type specific-week,05,3rd,mon,wed

(From the 3rd Monday to the 3rd Wednesday in May)

Example: -event-type specific-week,05,3rd,wed,mon

(From the 3rd Wednesday to the 3rd Monday in May)

(When May 1st is a Monday)

ETERNUS CLI User's Guide

P2X0-1210-05ENZ0

Show Quick Links

Table of Contents