Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show qos-mode
show qos-mode
This command displays the setting status of the QoS function and QoS performance flexibility function.
■
Syntax
show qos-mode
■
Parameter
No parameters.
■
Output
QoS Mode
Flexible Mode
■
Example(s)
The following example displays the setting status of the QoS function and QoS performance flexibility
function:
CLI> show qos-mode
QoS Mode
Flexible Mode [Disable]
CLI> show qos-mode
QoS Mode
Flexible Mode [Disable]
CLI> show qos-mode
QoS Mode
Flexible Mode [Enable]
Setting status of the QoS function (Enable or Disable)
Setting status of the QoS performance flexibility function (Enable or Disable)
[Disable]
[Enable]
[Enable]
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
370
P2X0-1210-05ENZ0