Release Eco-Raid-Group - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.1 RAID Group Management > release eco-raid-group

release eco-raid-group

This command releases the Eco-mode schedule that is associated with a specific RAID group(s).
■
Syntax
release eco-raid-group {-rg-number
■ Parameter
-rg-number
or
-rg-name
■ Example(s)
The following example releases an Eco-mode schedule associated with the RAID group named "RGP001":
CLI> release eco-raid-group -rg-name RGP001
The following example releases an Eco-mode schedule associated with RAID groups #1 – #10 at the same
time:
CLI> release eco-raid-group -rg-number 1-10
rg_numbers
This parameter specifies a RAID group identifier. One or more parameters can be specified. For
details, refer to "1.2.9 RAID Group Syntax" (page
rg_numbers RAID group number
rg_names
RAID group name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
rg_names
| -rg-name
25).
104
}
P2X0-1210-05ENZ0