Fujitsu Eternus DX100 S3 User Manual page 724

Chapter 6 Information Settings and Display
6.4 Utility > show reservation
APTPL
When volume identifiers are specified
Volume
Reservation Key
Hold Reservation
■ Example(s)
The following example displays a list of the reserved volumes:
CLI> show reservation
Volume
No. Name
----- -------------------------------- ---- ---------------- ---- ---------------- ---------- ----------- ---------- ----------
1 LogicalVolume1
12 LV12
13 LV13
111 LogicalVolume111
The following example displays information about all the hosts with volume #1 reserved. In the host
information, the reservation key and the reservation status of the volume corresponding to the reservation
key are displayed:
CLI> show reservation -volume-number 1
Volume
No. Name
----- -------------------------------- ---- ---------------- ---------------- -----------
1 Volume#1
Indicates whether the reservation information is kept for the power cycle that occurred.
Volume identifiers
No. Volume number
Name Volume name
Host Host identifiers
No.
Name
Reservation key (Identifier information used for the persistent reservation)
Reservation status of a volume by a reservation key
LUN Port LUN Group
No. Name
11 CM#0 CA#0 Port#0
222 CM#1 CA#0 Port#1
13 -
- CM#1 CA#0 Port#0
Host Reservation
No. Name Key
0 Host-name-0000 0123456789abcdef Yes
1 Host-name-0001 00123efa30939000 Yes
2 Host-name-0002 00133495828492A3 No
724
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Host number
Host name
Registrant Reservation Persistent APTPL
Count Type
- - 32 WE
- - 1 EA-RO
1 Affinity-Group#1 10 -
- - 10 -
Hold
Reservation
Yes Yes
Yes No
No No
- No
P2X0-1210-05ENZ0