Show Email-Notification - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.2 Network Management > show email-notification

show email-notification

This command displays the parameters of E-mail notification functions.
■
Syntax
show email-notification
■ Parameter
No parameters.
■ Output
Send E-Mail E-mail send mode (Enable or Disable)
Port
SMTP Server SMTP server name
SMTP Port No
Authentication Method
User Name
From
To1 – To5
Text1 – Text10
Retry Count Retry count
Retry Interval(sec)
Response Timeout(sec)
Connection Timeout(sec)
Partial mode
Partial size(KB)
Ethernet port
Port number to access an SMTP server
SMTP authentic method
User name for SMTP authentication
Sender email address
Receiver addresses of an email that is sent from the system
The fixed messages included in email messages
Retry interval (seconds)
Timeout value for inactive communication that occurs during communication to the mail
server (in seconds)
Timeout value for establishment of communication with the mail server (in seconds)
Partial mode.
Partial size (KB)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
546
P2X0-1210-05ENZ0