Drive Syntax; Alias Name Syntax; Thin Provisioning Pool Syntax - Fujitsu Eternus DX100 S3 User Manual

Chapter 1 Overview
1.2 The Command Syntax
1.2.4

Drive Syntax

The format that can be used for drive numbers is either "xxyy" or "xyy". "xx" or "x" indicates the enclosure
number. For the ETERNUS DX100 S3/DX200 S3 or the ETERNUS DX200F, 00 or 0 indicates the controller
enclosure. For details, refer to
digit decimal). For a 3.5" drive, between 00 and 11 (a two-digit decimal) can be specified for "yy". For a 2.5"
drive, between 00 and 23 can be specified for "yy". For a 3.5" drive in a high-density drive enclosure, from 00
to 59 can be specified for "yy". 2.5" drives in high-density drive enclosures are not supported.
Drive numbers can be combined as follows:
• A single drive number: 1003
• A list of drive numbers: 1003,004
• A hyphenated range of drive numbers from
• A list of drive numbers, drive ranges, or both, separated by commas (,). Spaces are not permitted before or
after commas (,): 0003,0006,010-011
1.2.5

Alias Name Syntax

The format of an alias is a character string that has a maximum of 16 ASCII characters. Usable characters are
those given in
used.
1.2.6

Thin Provisioning Pool Syntax

There are two methods for specifying Thin Provisioning Pool identifiers; Thin Provisioning Pool numbers or
Thin Provisioning Pool names.
• Thin Provisioning Pool number
A Thin Provisioning Pool number is automatically created by the system when a Thin Provisioning Pool is
created. This is a decimal number. Thin Provisioning Pool numbers can be displayed by using the "show
thin-pro-pools" command.
Thin Provisioning Pool numbers can be combined as follows:
- A single Thin Provisioning Pool number: 1
- A list of Thin Provisioning Pool numbers: 1,8,12
- A hyphenated range of Thin Provisioning Pool numbers from
- A list of Thin Provisioning Pool numbers, Thin Provisioning Pool ranges, or both, separated by commas
(,). Spaces are not permitted before or after commas (,): 1,3,10-12
"1.2.3 Drive Enclosure Syntax" (page
"1.2.2 Keywords and Parameters" (page 22)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
22). The "yy" is the drive number (a two-
a
to z : 0210-0211
of the document overview. Commas (,) cannot be
a
to z: 2-5
23
P2X0-1210-05ENZ0