Fujitsu Eternus DX100 S3 User Manual page 758

Chapter 7 NAS Function Setting and Display
7.2 Network Interface > set nas-interface
-ipv6-gateway
■ Example(s)
The following example shows settings for changing the IPv4 address of NAS interface #0:
CLI> set nas-interface -nas-if-number 0 -ip 192.168.0.101
The following example shows settings for changing the IPv6 address of NAS interface #1:
CLI> create nas-interface -nas-if-number 1 -connect-ip 2001:db8:20:3:1000:100:20:4
Optional. This parameter specifies the IPv6 gateway address. To delete the IPv6 gateway
address, specify a null character ("") or two colons (::).
• The address of a different subnet cannot be specified.
• A link local address can be specified.
• The "-connect-ip" parameter must be set.
gateway_address
IPv6 gateway address
Example: 2001:db8::1234:0:0:9abc
"" or :: The IPv6 gateway address is deleted.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
758
P2X0-1210-05ENZ0