Fujitsu Eternus DX100 S3 User Manual page 579

Chapter 5 System Settings and Display
5.2 Network Management > export ssl-certificate-request
-csr-filename
-key-filename
Optional. This parameter specifies the filename to store the CSR file. If omitted, "server.csr"
(default name) is used. If the same filename already exists, it is overwritten.
csr-filename
Name of the file to store the CSR file
The following conversion specifications, which begin with a percent character,
are replaced by their corresponding values at execution time. If other conversion
strings are specified, this command terminates abnormally with an error
message.
%s
%d
%t
%%
Optional. This parameter specifies the filename to store the key file. If omitted, "server.key"
(default file) is used. If the same filename already exists, it is overwritten.
key-filename
Name of the file to store the key file
The following conversion specifications, which begin with a percent character,
are replaced by their corresponding value at the time of execution. If other
conversion strings are specified, this command terminates abnormally with an
error message.
%s
%d
%t
%%
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Serial number of the system
Example:
server_%s.csr  server_123456789012.csr
Current date
Example:
server_%d.csr  server_20100316.csr (March 16, 2010)
Current time
Example:
server_%t.csr  server_123456.csr (12:34:56)
Percent character
Example:
server%%.csr  server%.csr
Serial number of the system
Example:
server_%s.key  server_123456789012.key
Current date
Example:
server_%d.key  server_20100316.key (March 16, 2010)
Current time
Example:
server_%t.key  server_123456.key (12:34:56)
Percent character
Example:
server%%.key  server%.key
579
P2X0-1210-05ENZ0