Raid Configuration Setting Procedure - Fujitsu Eternus DX100 S3 User Manual

Appendix D Basic Setting Examples
D.1 Settings When Using Volumes
*3:
D.1.1

RAID Configuration Setting Procedure

(1) Creating RAID groups
An example of creating a RAID group is shown below. For more details, refer to
Management" (page
Procedure
1
Specify 004 and 005 for the disk drive numbers, and create a RAID group that is named r1 (RAID1).
CLI> create raid-group -name r1 -level 1 -disks 004,005
(2) Creating volumes
An example of creating volumes is shown below. For more details, refer to
(page 105).
Procedure
1
Create volumes "v0", "v1", and "v2" in RAID group "r1".
CLI> create volume -name v -count 3 -rg-name r1 -type standard
LUN group
A LUN group is a group of LUNs that are accessed from the same host group and port group.
69).
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
923
"3.1 RAID Group
End of procedure
"3.2 Volume Management"
-size 512mb
End of procedure
P2X0-1210-05ENZ0